123 HP com setup 3830 : HP Officejet 3830 Setup Guide

 If you are looking for the right method for 123 HP com setup officejet 3830, then we are here o help you. In this article, we will tell you and guide you with everything about 123 HP com setup 3830. This guide is especially for 123 HP com setup 3830 installation, 3831, 3832, 3833, 3834, 3835, DeskJet Ink Advantage 3835, 3836, 3838, DeskJet Ink Advantage Ultra 5738, 5739 All-in-One printers. Setting a printer for the first time is not an easy task but you can do it all on your own if you carefully follow the instructions given below. The steps are simple and for your convenience, we have explained all the steps in lucid language.

In order to set up a printer for the first time, first, you have to remove all the packaging materials, connect the power cable, install the ink cartridges, and then finally, you will have to load paper into the input tray.

Before starting with 123 HP com setup officejet 3830, one important point to note here is that in case you are looking for the printer software, you have to go to the below-mentioned links: 

1. Printer software for 123 HP com setup 3830 printers: http://123.HP.com/DJ3830
2. Printer software for the 123 HP com setup 3830 installation printers: http://123.HP.com/OJ3830
3. Printer software for the HP DeskJet Ink Advantage Ultra 5730 printers: http://123.HP.com/DJ5730

So without further ado, let us dive straight into the step-by-step guide on 123 HP setup 3830:

123 HP Setup 3830 Guide : Step-by-Step

Step 1: Unpack the printer from the box

1. The first and foremost step is to remove the printer from the box. You have to remove all the tapes, stickers, and the rest of the packing materials from the printer.
2. You also need to remove all tape and packing materials from the outside of the printer. Then you have to open the exterior door.
3. Now, remove the tape and packaging material from under the ink cartridge access door.
4. The next step is to open the ink cartridge access door. Now you have to remove the tape and packing materials from inside the printer.
5. Finally, after following the above-mentioned steps, you need to close the ink cartridge access door, and then also close the exterior door.

Step 2: Connect the power cord, go to www.123.HP.com setup 3830 and then set the language, country/region, time, and date

1. Now you need to connect the power cord and then turn on the printer. In the end, you have to enter your localization settings.
2. You have to connect the power cord to the rear of the printer, and then you need to plug the other end of the power cord into an electrical outlet.
3. You have to press the Power button to turn the printer on.
4. You will see the Language menu displaying in the printer control panel.
5. You have to pick the language you are comfortable with. All you need to do is to touch your preferred language and then tap on the Yes to confirm your choice.
6. Next, the Country/Region menu appears on the printer control panel.
7. Pick the region or country where you based by touching on the specific country/region. You then need to tap on the option of  Yes to confirm your choice.
8. Now, you will the Date/Time menu displaying on the printer control panel.
9. You have to select the date, and then touch on the option of Next.
10. Finally, select the time and then tap on the option of Done.